≡ README.md
GitShark Logo — 3D Print Model
A flat, print-ready 3D version of the GitShark logo — the shark fin riding on a git branch.
What's in here
| File | Description |
|---|---|
model/gitshark-logo.3mf |
The 3D model (3MF, millimeter units) |
images/render-3d.png |
Render of the model |
Model specs
| Property | Value |
|---|---|
| Footprint | 45.1 mm × 55.5 mm |
| Height | 0.4 mm (flat) |
| Triangles | 1,892 |
| Format | 3MF |
Printing it on a t-shirt
The model is deliberately only 0.4 mm high — two layers at 0.2 mm layer height — so it can be printed directly onto fabric:
- Print the first layer (0.2 mm) as usual on the bare build plate, then pause the print.
- Stretch the t-shirt over the build plate so the fabric lies flat on top of the first layer. Clip it down at the edges so it can't move.
- Resume the print. The remaining layer squeezes through the fabric weave and bonds the print to the shirt.
Tips:
- TPU (flexible filament) survives wearing and washing far better than PLA.
- Scale the model up freely — it's a flat extrusion, so any XY scale works. Keep Z at 100 %.
- No infill settings matter at this height; the whole part is top/bottom layers.
Of course you can also just print it flat as a sticker, badge or keychain blank.
Alternatively, print it flat and iron it on afterwards — see the iron-on guide.